Variables
General
A variable is a named value which changes over time e.g. the level of the battery, the time of day.
When Tasker encounters a variable name in a text, it replaces the name with
the current value of the relevant variable before carrying out the action.
The main purposes of variables are:
- dynamic binding: doing something with an action with data which
is unknown when the task is created e.g. respond to an SMS; the sender
is not known until the SMS is received.
- allow flow control within and
between tasks
- record data for some future use e.g. passing data between tasks
Global vs. Local Variables
Variables which have an all-lower-case name (e.g. %fruit_bar) are local, meaning that their value is specific to the task or scene in which they are used.
Variables which have one or more capital letters in their name (e.g. %Car, %WIFI) are global, meaning that wherever they
are accessed from the same value is returned.
Built-In Variables
The values of built-In variables are updated automatically by Tasker.
Local Built-In Variables
- Action Error
%err
Is set to an integer if an error occurred when running the last action. The actual number
can signify the error which occurred, but is usually 1 for most Tasker actions (notable
exception: Run Shell
and plugins). Every action sets or clears it, so it must be saved (e.g. with Variable Set) if it will be needed later than in the immediate next action.
- Action Error Description
%errmsg
A description of the error which last resulted in %err being set. Currently never set by
Tasker but possibly by some plugin actions.
- Task Priority
%priority
The priority of the running task. The priority determines which task
executes its next action when several tasks are running together.
See
also: Task Scheduling
- Task Queue Time
%qtime
How long (seconds) the running task has been running.
Note that tasks can be interrupted by higher priority tasks, so this number
is not necessarily the total run-time of the task.
- Task Caller
%caller
A variable array tracing the origin of the current running task. %caller1 gives the origin
of the current task, %caller2 the origin of %caller1 etc.
Example: if task A uses action Perform Task
to start task B, then when task A is run by pressing
the Play button in the task edit screen, %caller1 in task B will show task=A, %caller2 will show ui.
The format of each entry in the array is callertype(=callername(:subcallername))
Caller types ares detailed below:
- profile
a profile (when it's state changes). callername is either enter or exit depending on whether the profile
activated or deactivated. subcallername is the name of the profile, if it has one, otherwise anon
- scene
a scene event, with callername being the scene name. For element events, subcallername is the element name. For action bar button presses, subcallername is the label if one was given. For scene-global events (e.g. Key), subcallername is event type
- ui
the Play button in the task edit screen in the Tasker UI
- launch
clicking a child application icon in the launcher
- nbutton
a notification action button, either from Tasker's permanent notification or one created with one of the Notify actions.
callername specifies the label of the button if present.
- external
an external application
- qstile
a Quick Settings tile. callername specifies the label of the tile.
- appshort
an app shortcut (accessed via long-click on the Tasker icon). callername specifies the label of the tile.
- task
another task, from a Perform Task action. subcallername is the task name, if it has one, otherwise anon
Global Built-In Variables
- Airplane Mode Status
(dynamic)
%AIR
Whether Airplane Mode is on or off
- Airplane Radios
%AIRR
A comma-separated list of the radios which will be disabled when entering Airplane Mode.
Common radio names are: bluetooth, cell, nfc, wifi, wimax.
- Battery Level
%BATT
Current device battery level from 0-100.
- Bluetooth Status
(dynamic)
%BLUE
Whether Bluetooth is on or in some other state (off).
- Calendar List
%CALS
Newline-separated list of calendars available on the device.
Each entry is in the format calendarprovider:calendarname.
Example usage:
Variable Set, %newline, \n
Variable Split, %CALS, %newline
Flash, %CALS(#) calendars, first one is %CALS(1)
For the sign \n, press carriage-return on the keyboard.
- Calendar Event Title / Descr / Location
%CALTITLE / %CALDESCR / %CALLOC
The title, description and location of the current calendar event, if there is one. If there are multiple current calendar events the
variables refer to the shortest.
Tip: find other details about the current event(s) using the Misc / Test
action, specifying %TIMES for the data.
- Call Name / Number/ Date / Time (In)
(dynamic, monitored)
%CNAME / %CNUM / %CDATE / %CTIME
The caller name, number, date and time of the current (if a call is in progress) or last call received.
Caller number is 0 if it's unknown.
Caller name is ? if it's unknown (probably because the caller number was blocked)
and set to the caller number if the contact couldn't be looked up.
It's unavailable on Android versions prior to 2.0.
- Call Name / Number/ Date / Time / Duration (Out)
(dynamic, monitored)
%CONAME / %CONUM / %CODATE / %COTIME / %CODUR
The called name, number, date and time of the last (not the current) outgoing call made.
Called Name is set to the called number if the contact couldn't be looked up.
It's unavailable on Android versions prior to 2.0.
- Cell ID
(monitored,dynamic)
%CELLID
The current cell tower ID if known.
If you are using a Cell Near state, note that sometimes the Cell Near state will stay active
even though %CELLID reports that the tower ID is unknown or invalid; that is because Cell Near only
responds to valid IDs to prevent the state becoming inactive e.g. due to a service interruption.
For backwards compatibility, UMTS cells are reported with a GSM prefix.
From Android 4.2, Tasker version 4.3+, cells could be found from 2 different network types simultaneously. In that case, the value is reported with preference for the network type leftmost on the list: GSM, CDMA, UMTS, LTE.
- Cell Signal Strength
(monitored,dynamic)
%CELLSIG
The current phone signal level from 0-8 inclusive on a rougly linear scale. On some phones, the level will rise in steps of 2 (0,2,4,6,8). The value is -1 if the value
is unknown or there is e.g. no service.
From Android 4.2, Tasker version 4.3+, cells could be found from 2 different network types simultaneously. In that case, the value is reported with preference for the network type leftmost on the list: GSM, CDMA, UMTS, LTE.
There is a bug with some Android versions that the reported signal strength is not updated until the
device is turned off and on.
- Cell Service State
(monitored,dynamic)
%CELLSRV
The current phone service state. One of unknown, service, noservice, emergency, nopower.
- Clipboard Contents
(monitored,dynamic)
%CLIP
The current contents of the system clipboard. Please note that the clipboard can't be accessed while the device's screen is securely locked.
- CPU Frequency
%CPUFREQ
The current frequency CPU 0 is running at. See also: CPU Control.
- CPU Governor
%CPUGOV
The current governor controlling the frequency of CPU 0. See also: CPU Control.
- Date
%DATE
Current human-readable date.
- Day of the Month
%DAYM
Current Day of the Month, starting at 1.
- Day of the Week
%DAYW
Current Day of the Week starting with Sunday.
- Device ID / Manufacturer / Model / Product
%DEVID / %DEVMAN / %DEVMOD / %DEVPROD
The ID, manufacturer, model and product name of the device.
Note: ID is not a unique
identifier for the device, but rather for the hardware of the device. See also: %DEVTID.
- Device Telephony ID
%DEVTID
Returns the unique telephony-based ID for the device (e.g. for GSM the IMEI, for CDMA the
MEID or ESN).
Not available on all devices.
- Display Brightness
%BRIGHT
Current screen brightness, 0-255. On some devices, if the Android setting Auto Brightness is enabled, the
value will always be 255.
- Display Timeout
%DTOUT
Current system screen timeout (seconds).
- Email From / Cc / Subject / Date / Time
(dynamic)
%EFROM / %ECC / %ESUBJ / %EDATE / %ETIME
The From, Cc, Subject, Received Date and Received Time of the last email received
by the K9 email agent.
- Free Memory
%MEMF
System free memory remaining in MB.
- GPS Status
(monitored,dynamic Gingerbread+)
%GPS
Whether the system GPS receiver is on or off.
- Heart Rate
(monitored,dynamic)
%HEART
The current detected heart rate in beats per minute.
See also: state Heart Rate.
The value will be negative for no contact (-1), accuracy unreliable (-2) or some other problem (-3)
- HTTP Response Code / Data / Content Length
(dynamic)
%HTTPR / %HTTPD / %HTTPL
Values from the last HTTP POST/GET action.
If the server doesn't return a content length, %HTTPL will be calculated from the returned
data where possible.
- Humidity
(monitored,dynamic)
%HUMIDITY
The relative ambient air humidity in percent.
See also: state Humidity.
- Input Method
%IMETHOD
The current active input method. Consists of 4 parts separated by commas: Method Name, SubType Name, Mode, Locale.
To access particular parts, use the Variable Split action.
- Interrupt Mode
(dynamic)
%INTERRUPT
Only available on Android 5.0+, requires Tasker's notification access service to be enabled, see Android's
Sound & Notification settings.
Android 5.0+: the current state of interruptions mode on the device: none, priority or all
See Also: action Interrupt Mode
Android 6.0+: the current state of Do Not Disturb mode on the device: none, priority, all or alarms
See Also: action Do Not Disturb
- Keyguard Status
%KEYG
Whether the Keyguard is on or off
- Last Application
%LAPP
The name of the application that was in the foreground before the current one e.g. Maps.
- Last Photo
%FOTO
The filesystem path to the last photo taken by Tasker or the
standard system camera application.
- Light Level
(monitored,dynamic)
%LIGHT
The last recorded light level in lux.
Note that Android does not return a value until the light
level changes, so to test the sensor is working you should put it near a bright light initially.
May not change when the device display is off, see Menu / Prefs / More / Display Off Monitoring / Light Sensor
.
- Location
(dynamic)
%LOC
The latitude and longitude of the last GPS fix.
See note.
- Location Accuracy
(dynamic)
%LOCACC
The accuracy in metres of the last GPS fix.
See note.
- Location Altitude
(dynamic)
%LOCALT
The altitude in metres of the last GPS fix, or 0 if unavailable.
See note.
- Location Speed
(dynamic)
%LOCSPD
The speed in metres/second at the last GPS position fix or 0 if unavailable.
See note.
- Location Fix Time Seconds
(dynamic)
%LOCTMS
The time in seconds of the last GPS fix. To get age of fix, take this away from %TIMES.
This value is not set until an offset of the GPS time from the fixed time has
been calculated (should be after the first GPS fix) because the value is meaningless
until that point.
See note.
- Location (Net)
(dynamic)
%LOCN
The latitude and longitude of the last network location fix.
See note.
- Location Accuracy (Net)
(dynamic)
%LOCNACC
The accuracy in metres of the last network location fix.
See note.
- Location Fix Time (Net)
(dynamic)
%LOCNTMS
The time in seconds of the last net location fix. To get age of fix, take this away from %TIMES.
See note.
- Magnetic Field Strength
(monitored,dynamic)
%MFIELD
The total magnitudes in micro-Teslas of the magnetic fields acting on all three axis of the devices sensor.
Updated once per second.
See Also: state Magnetic Field
.
- Music Track
(monitored,dynamic)
%MTRACK
The current playing music track, supported for:
- Tasker actions Music Play and Music Play Dir
- Built-in Android music-player, probably not on all devices however
- Power AMP
- BeyondPod (Tasker v1.2.1+)
- Phantom Music Control Pro
- Media Utilities
Priority: if both Tasker and one of the other supported apps are playing simultaneously, the
non-Tasker track will be shown. If more than one of the other supported apps is playing
simultaneuosly, behaviour is unspecified.
Notes:
- if you don't have a supported player, you could try Phantom Music Control Pro or Media Utilities, which support a lot of
players and should pass the info on to Tasker
- pausing a track clears the variable, unpausing sets it again
- your music player may need an option enabled in order to broadcast the track information, or
the broadcast may only be available in a 'pro' version
- Muted
%MUTED
Whether the microphone is currently muted (on) or not (off).
- Night Mode
%NIGHT
The current Android Night Mode.
One of on, off or auto.
If auto, Android will decide whether it should be in Night Mode itself.
- Notification Title
(monitored, dynamic)
%NTITLE
The title of the last notification shown in the status bar. Prior to KitKat, requires Tasker's accessibility server
to be running (see Android Accessibility Settings). From KitKat, requires Tasker's Notification Listener service
to be running instead.
In a task running as a result of a Notification
or Notification Removed
event, use variable %evtprm2 instead
of %NTITLE. This is much more reliable and you have access to other parts of the notification (%evtprm3 etc)
Notifications generated by Tasker are not shown.
- Phone Number
%PNUM
The current phone number of the device, if it's in service.
On some phones it doesn't work (Android limitation), seems related to the type of SIM.
- Pressure
(monitored,dynamic)
%PRESSURE
The current air pressure on the device in millibars.
May not change when the device display is off, see Menu / Prefs / Monitor / Display Off Monitoring / Pressure Sensor
.
- Profiles Active
(dynamic)
%PACTIVE
A comma-separated list of the currently active, named profiles in activation order. Duplicate
names will appear on the list only once. The list always starts and ends with a comma
to make matching easier, if it's not empty.
- Profiles Enabled
(dynamic)
%PENABLED
A comma-separated list of the currently enabled, named profiles in creation order. Duplicate
names will appear on the list only once. The list always starts and ends with a comma
to make matching easier, if it's not empty.
- Roaming
%ROAM
on if device is roaming on the current telephone network, otherwise off.
- Root Available
%ROOT
yes if root functions are available on this device, otherwise no.
- Screen
(dynamic)
%SCREEN
Whether the screen is on (value on) or off (value off).
- SDK Version
%SDK
The numeric Android SDK version
of the device.
- Silent Mode
(dynamic)
%SILENT
The current state of silent mode: off, vibrate or on.
From Android 5.0+ this variable is intended to only reflect whether the device
is in vibrate mode (vibrate) or not (any other value), but the on value is included for backwards
compatibility and set when the device is not in vibrate mode and the interrupt mode is none
or priority.
See Also: variable %INTERRUPT, actions Silent Mode and Interrupt Mode.
- SIM Serial Number
%SIMNUM
The serial number of the SIM card, if one is present and accessible.
If the SIM has not been unlocked it will not be available.
- SIM State
%SIMSTATE
The current state of the SIM card.
One of unknown, absent, pinrequired, pukrequired, netlocked or ready.
- Speakerphone
%SPHONE
Whether the speakerphone is on or off
- Speech
(dynamic)
%SPEECH
The current utterance as a result of a Say or Say File action, if applicable.
- Tasks Running
(dynamic)
%TRUN
A comma-separated list of any named tasks which are currently running. The list always starts
and ends with a comma to make matching easier, if it's not empty.
- Telephone Network
(dynamic, monitored)
%TNET
The current telephony network operator the device is using.
May be unreliable on CDMA networks
- Temperature
(monitored,dynamic)
%TEMP
The current ambient temperature in degrees Celsius.
May not change when the device display is off, see Menu / Prefs / Monitor / Display Off Monitoring / Temp. Sensor
.
See also: state Temperature.
- Text From/Date/Subject/Time
(monitored)
%SMSRF / %SMSRN / %SMSRB / %MMSRS / %SMSRD / %SMSRT
The sender address, name, body, subject, date and time of the last text (SMS or MMS) received.
These variables will be empty until the first time a text is received after
they have been referenced because Tasker does not monitor texts unless it's needed.
Name is set to sender address of no contact could be looked up.
It's unavailable on Android versions prior to 2.0.
Body (%SMSRB) is only set for SMSs.
Subject (%MMSRS) is only set for MMSs.
- Time
%TIME
Current human-readable time separated by a period e.g. 10.59
- Tether (dynamic)
%TETHER
A comma-separated list of enabled tethering forms i.e. connections over which another device can connect to this
one in order to use its internet connection.
The possible forms are wifi, usb or bt.
BT will only be present when an actual client is connected via BT for using the devices network connection, whereas
the others will be present as soon as the functionality is enabled (Android bug/limitation).
- Time MilliSeconds
%TIMEMS
The current time in milliseconds.
(milliseconds since some time in January, 1970, if you must know).
- Time Seconds
%TIMES
The current time in seconds.
(seconds since some time in January, 1970, if you must know).
- UI Mode
(monitored,dynamic)
%UIMODE
The current Android UI mode.
One of car, desk, appliance, tv (television), watch, undef (undefined) or normal.
- Uptime Seconds
%UPS
The number of seconds since the device last booted.
- Volume - Alarm/Call/DTMF/Media/Notification/Ringer/System
(dynamic)
%VOLA / %VOLC / %VOLD / %VOLM / %VOLN / %VOLR / %VOLS
Current audio channel volume level.
On some devices, volume changes are not picked up dynamically, on others not
when using the phone app.
- WiFi Info
%WIFII
When connected to an Access Point (AP), shows human-readable data about the AP. When not connected,
show details of the most recent Wifi scan results for nearby APs.
On Android 8.1+, may require basic location services to be enabled in Android settings.
- WiFi Status
(dynamic)
%WIFI
Whether WiFi is on or off.
Note: if WiFi is enabling or disabled, in fact anything but enabled, it's classed as off.
- Wimax Status
%WIMAX
Whether Wimax is on or off.
Note: if Wimax is enabling or disabled, in fact anything but enabled, it's classed as off.
- Window Label
(monitored,dynamic)
%WIN
The label of the current window, which could be a full-screen activity or a dialog.
Not set if the label is unknown.
For some windows, the label might be that of the first item in the window e.g. a menu entry or even a button.
General Notes
Variables marked dynamic
in the list above trigger changes in Variable Value states
and Variable Set events whenever their value changes.
Variables marked monitored
will cause the relevant monitor to startup to track their state
when they are used in contexts or tasks which are used by widgets or enabled profiles.
For instance, %CELLID used in a Flash action will cause cell location to be tracked.
Limitation: monitored variables cannot be detected in anonymous shortcuts.
Note On Location Variables
When the relevant provider (Net or GPS) of a location context is active, these variables report the values from the provider,
which may be more recent than Tasker has seen if other applications are asking for location.
When the relevant provider is not active, these variables report the last values seen by Tasker,
which could be the result of a Get Location
action or of monitoring for a Location Context
.
That means the the reported fix times could go backwards, if you turn off the location provider
between two uses of the variables.
Location variables can also be manually updated by running the Get Location
action.
User Variables
The action Variable Set (and several others) can be used to create new variables. Variable names have the following restrictions:
- they must start with the % character
- they are case-sensitive
- then must at least a further 3 alphanumeric characters
- they can also contain the underscore character (_) but not start or end with it
In general, it's best to use local variables wherever possible because:
- you know they won't be interfered with by other tasks or scenes
- they are more efficient in several ways
Note: multiple copies of the same task running at the same time each have their own separate copy of their local variables.
Scene-Local Variables
Each scene has its own set of local variables which it shares with
the task that created it; both the scene and task
see changes to the variables made by either.
Any task which starts as a result of a scene event (e.g. a tap on an element)
also shares the variables of the scene (and thus of the original
task which created the scene).
As a consequence, a task started by a scene event (e.g. Tap on an element)
which shows a new scene e.g. via the Show Scene action, will result in
the second scene sharing the variables of the first scene.
When a task shows a scene that was created by a different task (or a different copy
of the same task) and subsequently hidden, the task's variables are copied to the scene variables (overriding
values of variables which already exist) but
the task does not share the scene variables and cannot see changes to them.
Escaping Variable Names
If you want to prevent a variable name being replaced, put a \ in front of it e.g.
Variable Set, %new, \%old
Will set the value of %new to %old, not the value of %old.
In order to precede a variable name with a \ you can escape the backslash e.g.
Variable Set, %new, \\%old
Will set the value of %new to \ followed by the value of %old.
Variable References
It's possible to indirectly refer to variables by preceeding one or
more extra % signs to the start of the variable name.
For example:
Variable Set, %colour, red
Variable Set, %varname, colour
Flash %%varname
... will flash red.
Using this notation it's possible to assign variables whose name is
not known beforehand:
Read File, variablename, To Var, %varname
Variable Set, %%varname, red
This will set the variable whose name is stored in the file variablename
to red.
You can nest references as deeply as you like (e.g. %%%%var
)
but mental stress and bugs are sure to follow.
If any part of the chain has an invalid variable name then the original
reference will be returned. In the first example, if %varname
is set to !!!
, then %%varname will be flashed instead
of red.
Variable Lifetime
The value a global variable holds lasts until Tasker is uninstalled if
it is not changed by any task.
Local variables are lost at the end of the task they were created in, or
when the parent scene is destroyed in the case of tasks called from scenes.
Uninitialized Variables
User-variables which have not had a value assigned do not have replacements carried out e.g. in the expression I love %fruit, if
%fruit is uninitialized, the expression remains as it is, otherwise %fruit is replaced with the value.
Exception: uninitialized variables used in mathematical expressions are replaced with 0.
Variables In Plugins
Plugin developers can tell Tasker to replace variables
it finds in plugin strings with their current Tasker value. If you have a plugin
which doesn't support this, send the developer this URL
http://tasker.dinglisch.net/plugins.html
which has the relevant details.
Variable Arrays
Tasker supports pseudo-arrays.
They are especially useful when used with the For
action, since you can
perform a set of actions on each element in turn e.g. list a set of files then
test each one.
Examples
If the four variables %arr1, %arr2, %arr3, %arr4 hold respectively a, b, c and d
then we have an array with 4 elements.
These variables can be used just like any other, however it is also possible to access
them in special ways. Here are some examples:
- %arr(#)
The number of defined array elements (4 in this case)
- %arr(#>)
The index of the first defined array element, or 0 if none are defined (1).
- %arr(#<)
The index of the last defined array element, or 0 if none are defined (4)
- %arr(#?b/c)
A comma-separated list of the array indices (lowest to highest) with matching values, or 0 if none match (2,3 in the example)
- %arr(#?~Rregex here)
Same as above but with regex matching
- %arr(>)
The contents of the first defined array element (a)
- %arr(<)
The contents of the last defined array element (d)
- %arr() or %arr(:)
All of the array elements separated by commas (a,b,c,d)
- %arr(2) or just %arr2
The content of the element with index 2 (b)
- %arr(2:4)
Contents of defined elements with indices 2 to 4 (b,c,d)
- %arr(:3)
All the defined elements with indices up to 3 (a,b,c)
- %arr(3:)
All the defined elements with indices starting from 3 (c,d)
- %arr(1:2)
All the defined elements with indices from 1 to 2 (a,b)
Notes:
- arrays will virtually always have all their elements defined so e.g. %arr(>) will be the same as %arr(1), %arr(#) will be the same as %arr(#<)
- index specifiers can themselves be variables (e.g. %arr(1:%MAX) or %arr(#?%FINDME)) but not variable arrays
Creating An Array
- using
Array Set
:
Array Set, %arr, a b c d
- using
Variable Split
on an existing (simple) variable:
Variable Set %arr a b c d
Variable Split %arr
- by assigning individual elements with
Variable Set
:
Variable Set, %arr3, c.
- using
Array Push
to add an initial element
- some other actions also create arrays for their results e.g.
List Files
.
Inserting Elements
Use the Array Push
action.
The Fill Spaces parameter might need more explanation. It is only relevant if one or more of the array elements are undefined. As an example, if we have the array elements %arr1 and %arr3 containing apple and banana:
- Array Push %arr1, 1, pear
leaves %arr1, %arr2 and %arr4 containing pear, apple and banana.
- but Array Push %arr2, 1, pear, Fill Spaces
leaves %arr1, %arr2 and %arr3 containing pear, apple and banana.
Removing Elements
Use the Array Pop
action. Note the difference between Array Pop
and Variable Clear
:
Pop
reduces the number of elements in the array, while Clear
merely changes elements to undefined.
Example: if we have the array elements %arr1, %arr2, %arr3 containing apple,pear and banana:
- Variable Clear %arr2
leaves %arr1 and %arr3 containing apple and banana.
- but Array Pop %arr2
leaves %arr1 and %arr2 containing apple and banana.
Deleting An Array
Use Array Clear
.In most cases you could also use Variable Clear %arr* with Pattern Matching checked,
but that would also delete variables called e.g. %arrTOODEETOO so Array Clear
is safer.
Sorting
The Array Process
action offers various sorting options, amongst other things.
Array Efficiency
Arrays are intended for convenience when processing high-level data, not for e.g.
processing astronomical data. Doing thousands of array actions will likely
take several seconds (although mostly due to the housekeeping work done by Tasker
in-between each action rather than due to the array operations themselves).
In terms of storage efficiency, they are also fairly hopeless. You probably do not
want to store tens of thousands of items in an array.